Searches >> Factory Crane

Factory Crane Search Result

Overhead crane

works very similar to a gantry crane but instead of the whole crane moving, only the hoist / trolley assembly moves in one direction along one or two fixed beams, often mounted along the side walls or on elevated columns in the assembly area of Factory. Some of these cranes can lift very heavy loads.

Bridge Crane

A bridge crane runs on an elevated runway system along the length of a Factory and provides three axis of hook motion (X, Y, and Z). The hoist moves the load up and down, the trolley moves the load right and left, and the bridge of the crane moves the load forward and backward. Both single and double girder overhead traveling

Truck mounted crane

chassis suspension. Most cranes of this type also have moving counterweights for stabilization beyond that provided by the outriggers. Loads suspended directly aft are the most stable, since most of the weight of the crane acts as a counterweight. Factory-calculated charts (or electronic safeguards) are used by crane operators to determine the maximum safe loads for stationary (outriggered) work as well as (on-rubber) loads and travelling speeds.

Cranes

Development depends on infrastructure and infrastructure on heavy machineries. Of all the heavy machines Cranes acquire an important position as they are involved in the building and maintenance of huge projects. Crane machines are the huge tower like machineries having ropes meant to lift or to lower any heavy devices. Hence they are also referred

FAQ About Factory Crane

  • Wall/Column Cantilever Mount "I" Beam Jib Crane

    • Wall/Column Cantilever Mount "I" Beam Jib Cranes are ideal for heavier loads from 1 to 5 tons (heavier capacities available, contact the Factory). They are also available in motorized or manual rotation. Used instead of a wall bracket jib crane when headroom is at a premium.Provide hoist coverage for individual use in bays, along walls or columns, and as supplements to

  • Testing and Examination of Cranes and Certain Lifting Appliances

    • have at least the following experience and training - A sound technical and professional training with recognised national qualifications, and have approximately two years practical experience in a suitable appointment A satisFactory knowledge of the inspections or tests or examinations that they are carrying out The ability to draw up certificates and reports required on the work that they are carrying out A thorough knowledge of the applicable specifications,

  • Overhead Crane and Bridge Crane

    • called overhead cranes are actually a kind of industrial material handling crane making use of a line andhook device which runs on a horizontal beam running along two widely separated rails. Numerous overhead cranes could be seeninside a long Factory structure and they can run along the building's two long walls, like a gantry crane. Overhead Crane Main Parts Overhead cranes normally have either double beam or one beam construction. These are made out of more complex girders ornormal

  • Mobile Crane Clearances

    • a copy of which is often also mounted in the crane cab. For most work, the rough data obtainable with a range diagram are sufficient to verify that the job can be done and that boom and jib lengths and jib offset will offer satisFactory clearance. A clearance problem is shown in Figure 5.4 where crane reach is obstructed by the building in front of it. When conditions appear to be too close to permit reliance on the diagram, calculations or a more comprehensive graphical

  • A New Approach for Controlling Overhead Traveling Crane Using Rough Controller

    • fuzzy logic controller and rough controller has been demonstrated. The results of a simulation comparing the performance of both controllers are shown. From these results we infer that the performance of the proposed rough controller is satisFactory. The crane can be considered as one of the most important tools used in industry to transfer loads from one desired position to another. Usually cranes have very strong structures in order to lift heavy payloads in factories, in building construction,

  • Topless Tower Crane

    • The mechanisms of topless tower crane adopt domestic famous Factory products, reliable performance, good governing performance and shocklessness [caption id="attachment_47" align="alignleft" width="360" caption="topless tower crane"][/caption] Topless Tower Crane Key Specifications/Special Features: ยทย 

  • Articulating Jib Cranes

    • nearly any type of manipulator, balancer, or hoist. BossBuyer Articulating Jib Cranes are designed using a 15% factor for weight of hoist unit and a 50% impact factor. All BossBuyer Articulating Jib Cranes are designed for moderate usage. Consult Factory for usage other than moderate and all instances of high cycle rates or high impact applications such as high-speed air or electric hoists, vacuum lifters, or magnets.

Relative Searches

Factory Crane, EOT Crane, Electric Overhead, Electric Crane, Double Girder Crane, Factory Crane, Fixed Crane, Floor Crane, Gantry Crane, Grab Crane,