FAQ >> Mast Style Jib Crane

Mast Style Jib Crane

Mast Style Jib Cranes are efficient because they do not require a foundation and the large base plate, but do require mounting at the top and bottom.  Available in both a full and drop cantilever, with the drop cantilever providing additional clearance for any overhead obstructions. BossBuyer Mast Style Jib Cranes are available in two series: 200 Series Mast Style Jib Cranes - Full Cantilever

  • Lower cost alternative to foundation mounted free standing jibs
  • No mounting foundation required
  • Allows maximum use of headroom to provide the highest possible lifting distance
  • Standard capacities to 5 tons
  • Standard height and spans to 20 feet
  • Greater capacities, heights, and boom spans available upon request
  • Motorized rotation available
201 Series Mast Style Jib Cranes - Drop Cantilever
  • Identical to 200 Series with the addition of side-plate connections which allows boom to be mounted permanently at any specified height on the mast
  • Lower cost alternative to foundation mounted free standing jibs
  • No mounting foundation required
  • Standard capacities to 5 tons
  • Standard height and span to 20 feet
  • Greater capacities, heights, and boom spans available on special order
  • Motorized rotation available
IMPORTANT NOTE: Jib cranes should not be hung from any existing building structure without first consulting a qualified architect or engineer for the purpose of determining if the structure is adequate. Severe bodily injury and property damage can result if this procedure is not followed.

Relative FAQ