Searches >> Block Truck Crane

Block Truck Crane Search Result

Rough terrain crane

Rough terrain Crane is a crane mounted on an undercarriage with four rubber tires that is designed for pick-and-carry operations and for off-road and "rough terrain" applications. Outriggers are used to level and stabilize the crane for hoisting. These telescopic

FAQ About Block Truck Crane

  • Truck Crane Boom Equipment

    • jib mounting.AUXILIARY BOOM HEADRemovable auxiliary boom head has single nylon sheave mounted on anti-friction bearing. Removable pin-type rope guard for quick reeving. Installs on main boom head only. Removal is not required for jib use.HOOK Block75 ton (68.0 mt) block with five metallic sheaves on anti-friction bearings with hook and heavy duly hook latch. Quick reeving design does not require removal of wedge and socket from rope.60 ton (54.4 mt) block with five metallic sheave on anti-friction

  • Overhead Travelling Cranes

    • to ensure that the crane does not approach within 20' (6100mm) of that place .Various systems of work have been devised to ensure compliance with these requirements. Some examples are as follows -• The temporary construction of stop Blocks on the rails and the electrical isolation of the particular section of the rail track, would be deemed to be effective measures to prevent the crane from approaching within 20' (6100mm) of where personnel are likely to be employed• The placement

  • Cranes, lifting appliances and fork lift trucks

    • however, they are exempted from certain requirements of the Regulations, see page 34. "Lifting appliance" means:- "An excavator, fork-lift truck, mechanical grab, mechanical shovel, piling machine of any description, pulley or pulley Block, a winch which is designed to be used by itself, and any other prescribed appliance." Fork lift trucks are widely used in industry and are the cause of many accidents. Although many of these accidents are caused by misuse, defects on fork-lift

  • WALKING CRANE FOR OPERATION BY POWER OR HAND

    • consisting of two channel irons, united by suitable castings at top and bottom, and containing the rollers by which the mast is supported as it revolves. The boom is also formed of two channel irons, and from its outer end is suspended the running Block, the chain from which passes over a sheave at the end of the boom to the hoisting gear attached to the mast near its head, the slack chain falling from this to a receptacle at the foot of the boom.The mechanism of this crane, when operated by power,

  • Crane accessories and auxiliary equipment

    • End trucks confi gured with proprietary structural design programs Power supply line Demag DCL compact conductor line for 4 to 7 poles; connections ensure long-term power supply and minimize unplanned downtime Pre-assembled building Blocks for simple assembly or replacement of current collector trolleys or complete straight sections provide optimum serviceability IP 23 or IP 24 high protection against accidental contact with sealing lip and integral expansion joints for optimum

  • Bottom-Slewing Tower Cranes Structure and Configuration

    • be braced to the building for increased stability, and its height is limited. Slewing platform. The slewing platform carries, in addition to the mast, the entire ballast of the crane, as well as the motors. To balance the crane, the ballast Blocks are located at the rear of the platform, always opposite the jib. To be most effective, the greatest possible distance between the ballast and the mast would be desired. On the other hand, the smallest possible projection of the rear end of the

Relative Searches

Block Truck Crane, beam Crane, Auto Crane, Arm Crane, American Crane, Block Truck Crane, Boom Crane, Boom Used Crane, Bridge Crane, Building Crane,