Searches >> Remote Control Crane

Remote Control Crane Search Result

Tower crane

Tower Crane is a modern form of balance crane that consist of the same basic parts. Fixed to the ground on a concrete slab, tower cranes often give the best combination of height and lifting capacity and are used in the construction of tall buildings. The

Tower Crane

jib looms high above the work site. The tower cranes jib can place its load anywhere within the radius of operation without interfering with the structure over which it swings. In addition, the operator can either be on crane or control the crane Remotely using instrumentation located on the building structure, while enjoying an excellent view of the load and its surroundings at all limes. The use of tower crane has become synonymous with medium- to high-rise construction, be it for buildings

FAQ About Remote Control Crane

  • Truck cane standard upperstructure equipment

    • for ease of installation of pressure check gauges. OPTIONAL EQUIPMENT Single Axis Armrest Mounted Crane Controls, LP Heater/Defroster, Hydraulically Powered Air Conditioner or Heater and Air Conditioner, Tachometer, Work Lights, Electric Remote Control of Carrier from Upper Cab, 3rd Wrap Indicator.

  • Tower-mounted crane

    • in each range. More recent models have variable- frequency drive or other forms of continuously adjustable speed motors with friction or eddy-current brakes and creep speed. Automatic acceleration for all motions is typical on many cranes. Remote Controls are sometimes offered- A tower crane is said to be rop-.cleaving-.!erring being the preferred tower crane term for swing motion-if the swing circle is mounted near the tower top as in Figures 2.32 and 2,33 and it's said to be bollonr-slurring

  • Single Girder Overhead Cranes and Double Girder Overhead Cranes

    • : A.C. control packages to meet electrical requirements. Variable Frequency Drives and Remote Controls : Variable Frequency Drive in hoisting, cross travel, long travel for stcpless speed control can be implemented. also cranes with radio Remote Control Cranes for application in inaccssible and hazardrous areas. Brakes : Failsafe magnetic or hydraulic brakes of 150% torque or more are fitted on shaft extensions. For heavy duty cranes a second brake can be mounted to ensure failsafe

  • Crane Control program analysis and comparison

    • time settings so that each block starts and stops at a fairly steady. With high control precision, the design is faulty display, analysis and parameter monitoring capabilities, easy to use and maintain, and easy to realize automatic control and Remote Control.

  • Metallurgical cranes on the technical requirements for special work

    • factor, the working class to achieve the M5-level (including the M5 level) above; 7. Select the wire for high temperature situations, and has sufficient safety factor; 8. As far as possible away from heat sources such as the manipulation of Remote Control mode, otherwise the operator must set the security channel. (D) The crane must have a transformation of the transformation of units permitted qualified, reform must fulfill the procedures for cranes after transformation, must be made through

  • Customer Order cranes should know a few basic parameters

    • speed () m / min; double speed () m / min Car speed: single speed () m / min; double speed () m / min Cart speed: single speed () m / min; double speed () m / min Operation control: () cab operation; () cable ground operations; () wireless Remote Control Cart speed control mode: () linkage Taiwan; () cam speed; () Cab Type: () open; () closed Cab door Location: Right side of the door (); left open (); after the right door (); left open the door after the () Machine Color: () Electrical

  • Crane Component

    • refurbishment of old cranes. Standardized end carriages, standardized wheel bogies, underslung trolleys, drive units with squirrel cage motors, electric hoists up to 125 t lifting capacity, conductor systems, contactor control panels, radio Remote Controls, variable frequency speed control equipments, etc. BossBuyer crane components represent many years of experience in combination with permanent development in design. Customers benefit from our wide experience as crane manufacturers

  • Bottom-Slewing Tower Cranes Structure and Configuration

    • is traditionally located at the top of the mast, or the crane can be operated from a control post at the lower part of the mast. Many new models now offer a dimbing cab that can move along the mast for optimal view (Figure 19.17b). Wireless radio Remote Control of these cranes is now offered on most models. Masts are either lattice (Figure 19.16) or hollow section (Figure 19.17). hollow-section masts used to be common only on smaller models but are increasingly being seen on larger models, as

  • YJCrane Gantry Crane

    • hoist speeds and a ground speed of approximately 3 miles per hour. It has a sit down, center mounted cab design with noise suppression, which helps buffer the operator from engine noise. Wheel fenders are standard on all ISL Models and wireless Remote Control is offered as an option. The SL Model is designed for low duty cycle “pick and carry” type jobs. The SL can handle big loads and is narrower in width than the ISL. The SL has no traversing capabilities and is designed for

Relative Searches

Remote Control Crane, Pipe Crane, P H Truck Crane, Overhead Gantry Crane, Overhead Crane, Remote Control Crane, Rent A Crane, Rental Crane, Ship Crane, Single Crane,