Searches >> Hoist And Crane

Hoist And Crane Search Result

Side lift crane

A side lifter crane is a road-going truck or semi-trailer, able to Hoist And transport ISO standard containers. Container lift is done with parallel crane-like hoists, which can lift a container from the ground or from a railway vehicle.

Rough terrain crane

Rough terrain crane is a crane mounted on an undercarriage with four rubber tires that is designed for pick-and-carry operations and for off-road and "rough terrain" applications. Outriggers are used to level and stabilize the crane for Hoisting. These telescopic cranes are single-engine machines, with the same engine powering the undercarriage and the crane, similar to a crawler crane. In a rough terrain crane, the engine is usually mounted in the undercarriage rather than in the upper,

Jib crane

a type of crane where a horizontal member (jib or boom), supporting a moveable hoist, is fixed to a wall or to a floor-mounted pillar, which is a style of cranes in case of which a horizontal portion called the boom or the jib supports a moveable Hoist And is generally attached firmly to a wall or a pillar fixed to the floor. This type of crane consists of a pivoting head and boom assembly which carries a hoist and trolley unit. The pivoting head is supported either by a floor-mounted mast providing

Bridge Crane

A bridge crane runs on an elevated runway system along the length of a factory and provides three axis of hook motion (X, Y, and Z). The Hoist moves the load up and down, the trolley moves the load right and left, and the bridge of the crane moves the load forward and backward. Both single and double girder overhead traveling bridge crane designs allow very precise hook positioning and

All Terrain Crane

As the name suggests, all-terrain Cranes can manoeuvre through rough terrain as well as public roads with ease. These cranes are technologically the most advanced of all the mobile cranes. They come in both lattice-type and telescopic-type boom options. All terrain cranes that are ideal

Truck mounted crane

able to travel on highways, eliminating the need for special equipment to transport the crane. When working on the jobsite, outriggers are extended horizontally from the chassis then vertically to level and stabilize the crane while stationary and Hoisting. Many truck cranes have slow-travelling capability (a few miles per hour) while suspending a load. Great care must be taken not to swing the load sideways from the direction of travel, as most anti-tipping stability then lies in the stiffness

port crane

The Port Crane is suitable for heavy work at seaports, river ports and freight yards and it can be equipped with Hoisting hooks and grab buckets. Port Crane is applicable to various types of cargos and can be used for handling containers. The Port Crane is mainly composed by lifting mechanism, rotating mechanism and slewing mechanism. These three mechanisms can

EOT Crane

widely used type of power driven crane for indoor service is undoubtedly the three motion Electric Overhead Travelling Crane (EOT crane). It serves a larger area of floor space within its own travelling restrictions than any other permanent type Hoisting arrangement. As the name implies, this type of crane is provided with movement above the floor level. Hence it occupies no floor space and this can never interface with any movement of the work being carried out at the floor of the building.

Cranes

Development depends on infrastructure and infrastructure on heavy machineries. Of all the heavy machines Cranes acquire an important position as they are involved in the building and maintenance of huge projects. Crane machines are the huge tower like machineries having ropes meant to lift or to lower any heavy devices. Hence they are also referred

Truck Concrete Pumps

Truck mounted concrete pumps are those engineering products that are used to supply concrete to places which are difficult to reach by other heavy machines. Concrete Pumping Equipment required : concrete pump, heavy-duty pipe, hose and other accessories. Concrete pumps can be mounted on any type of diesel powered trucks. When pressure is applied to a column of fresh concrete by the concrete pump it forces the concrete through a lubricated pipe.

Bridge Crane

to build or fix a bridge. It operates on two tracks and has four way horizontal movement. Bridge cranes cover rectangular area and can be floor supported or hung from the ceiling. The main components of bridge cranes are bridge, trolley, Hoist drum, hoist cable, hoist block, hook bumpers, pendant and limit switches. On-off switch is on control pendant for taking emergency steps, in the event of failure of any of the control panels.

FAQ About Hoist And Crane

  • Truck Crane Boom Equipment

    • consists of a single telescope cylinder and high strength leaf chains to extend and retract the third and tip sections. High-strength four- plate construction with embossed side plate holes reduces weight and increases strength. A single boom Hoist cylinder provides for boom elevation of -4 to 78 degrees. Max tip height is 133’ (40.54 m).BOOM HEADWelded to outer section of boom. Five or six load sheaves and two idler sheaves are made of nylon and mounted on heavy- duty antifriction

  • Truck Crane Hydraulic System

    • PTOs. A separate steering pump is driven directly from the engine. Combined system capacity is 131 gpm (495 Ipm). Remote hydraulic oil cooler is standard. Main Winch Pump 57.3 gpm (216.9 Ipm) @ 4,500 psi (316.4 kg/cm2) Boom Hoist And Telescope Pump 42.6 gpm (161.3 Ipm) @ 4,500 psi (316.4 kg/cm2) Outrigger and Swing Pump 21.2 gpm (80.3 Ipm) @ 3,500 psi (246.1 kg/cm2) Power Steering Pump 8 gpm (30.3 lpm) @ 1900 psi (133.0 kg/cm2) FILTRATION Full

  • Tower Crane Safety Devices

    • Tower crane safety devices comprise: load moment limiter, turntable lock pin, boom backstop, Hoist limit switch, anemometer, level gauge, hydraulic overflow valve, counterbalance valve, two-way hydraulic lock, stewing warning lamp and travel warning lamp, etc. Load Moment Limiter Detection function: automatically detect boom angle and lifting

  • Safe Crane Operations

    • sourcesIf an estimate of the load is near the max. capacity of the crane, then use a dynamometer to measure the exact weightUse a loud signal, such as a whistle, horn or bell or verbal warning to alert employees of crane movementNever Hoist a load over the heads of employeesNever use limit switches or end stops as operating controlsBegin each shift by testing the upper limit switches Avoid running the crane into the end stops or limit switches Never walk backward when guiding a load

  • Brakes, Controls, Derricking Jibs and Cabins for Operators of Cranes

    • practicable controls should be so arranged that inadvertent operation can be prevented. Cranes with Derricking Jibs Cranes, fitted with derricking jibs, which are driven through a clutch from the same source of power which drives the Hoisting mechanism, must be fitted with an interlocking arrangement which prevents the free fall of the jib when the derricking clutch is disengaged. Precautions where Crane or Lifting Appliance has Travelling Slewing Motion Precautions must

  • Crane History

    • A crane is a machine that is capable of raising and lowering heavy objects and moving them horizontally. Cranes are distinguished from Hoists, which can lift objects but that cannot move them sideways. Cranes are also distinguished from conveyors, that lift and move bulk materials, such as grain and coal, in a continuous process. The word crane is taken from the fact that these

  • lifting crab of a EOT crane

    • The lifting crab of a EOT crane is an independent two motion machine and consists of the Hoist machinery built on to a frame, which is mounted on runner wheels, and driven by a motor through suitable gearing. The crab is also known as trolley. Various designs of crabs, arranged with C.I. side frames, mild steel side frames are in use.

  • WALKING CRANE FOR OPERATION BY POWER OR HAND

    • Fig. 52 represents a walking crane operated by power and consisting of a boom, rotating around a fixed column mounted upon an extended truck, which latter travels upon a suitable rail upon the floor. Power is utilized for Hoisting and lowering, and for propelling the crane longitudinally upon its track. Cranes of this type are built of any desired capacity from r to io tons, and for operation either by hand or by power. The base consists of two wrought iron girders united

  • Overhead Crane and Bridge Crane

    • Overhead Crane Main Parts Overhead cranes normally have either double beam or one beam construction. These are made out of more complex girders ornormal steel. The single bridge box girder crane is complete together with the system and the Hoist And is operated making use ofa control pendant. If the application needs heavier capacity systems for at least ten tons, double girder bridge cranes are normallyutilized. With the girder box configuration, one major benefit is the lower deadweight

  • Cranes and hoists operating rules

    • Crane operators shall comply with the following rules while operating the cranes and Hoists: Do not engage in any practice that will divert your attention while operating the crane. Respond to signals only from the person who is directing the lift, or any appointed signal person. Obey a stop signal at all times, no matter

  • PORTABLE TRUCK-MOUNTED CRANE BOOMS

    • on the truck for travel to the place where the material would be unloaded for the construction. A truck crane is designed for a more permanently attached boom and does not have much flat platform area to carry materials. That type of lifting and Hoisting equipment is considered and discussed as a mobile crane in the next section.

  • Tower-mounted crane

    • the pitfall of premature fatigue failure. With the exception of a few diesel-powered machines with hydrostatic drives, tower cranes are powered by electricity and motors driving all the machinery are almost universally electric, too. The Hoist motors on older machines have high- and low-speed ranges with stepped increments in each range. More recent models have variable- frequency drive or other forms of continuously adjustable speed motors with friction or eddy-current brakes and

  • Mobile Crane Clearance In Tight Quarters

    • working radius. While the boom or jib might have clear space to swing from the pickup location to the load setting zone, the minimum radius prevents loads from being placed close to the crane. A luffing jib might be fitted with a mid fall Hoist line to overcome this inadequacy. The tail-swing radius may encroach over an active traffic lane or face interference from an obstruction. A large crane can have a rear projecting gantry, strut, backstays, or a live mast capable of fouling

  • Single Girder Overhead Cranes and Double Girder Overhead Cranes

    • Span Range 3 meters to 30 meters Description of single girder overhead cranes Single girder dual motor cranes provide greater floor coverage than other type cranes. The close crane end approaches coupled with a close trolley approach Hoist give you more working floor coverage This can reduce space requirements in new buildings, or expand your usable space in existing buildings. Adjustable torque magnetic disc/shoe brake for smooth operation. Forged steel crane wheels for long

  • CABLE CRANES

    • over parallel tracks. Specifications of Cable Crane Spans range between 1,000 and 4,000 m. But 10,000 m. spans are also met with. Standard capacity is 1 to 25 tonne while cableways rated at 150-tonne capacity arc also in use. The load Hoisting speed is 1.5 to 0.9 m per second depending on the height and the conveying speed varies between 8 to 12 m/sec. Towers are spotted into the working position at a rate of 6 tc 25 m/min. Applications of Cable Crane Storage and production

  • MOBILE CRANES INTRODUCTION

    • mounted (c) Rail mounted locomotive (d) Floating cranes (e) Sky cranes Mobile crane (power driven) includes all type of traveling jib cranes, such as truck mounted, crawler mounted, and locomotive crane on rails.Mobile cranes are Hoisting devices mounted on rubber tyred trucks, rollers or railroad wheels. Most of these cranes are full-rotating. Their mountings make them a distinctive group. Truck, crawler and locomotive cranes have now been highly developed for industrial

  • Crane accessories and auxiliary equipment

    • via frequency inverters with speeds up to 240 fpm guarantee travel with minimum load-sway as well as precise positioning Hoist trolleys State-of-the-art Demag DR rope hoist of C-shaped design optimized for crane applications with higher Hoist And cross travel speeds provides higher handling rates and effi ciency for cranes with capacities up to 50 m t Compact designs with minimum approach dimensions and larger hook path guarantee optimum utilization of the available space and height

  • Crane & Hoist Safety Responsibilities

    • Supervisors are responsible for: Ensuring that employees under their supervision receive the required training and are certified and licensed to operate the cranes and Hoists in their areas. Providing training for prospective crane and hoist operators. This training must be conducted by a qualified, designated instructor who is a licensed crane and hoist operator and a full-time [COMPANY] employee. Evaluating

  • Crane Rigging a Load and Crane Overloading

    • Make sure that shackle pins and shouldered eye bolts are installed in accordance with the manufacturer's recommendations. Make sure that ordinary (shoulderless) eye bolts are threaded in at least 1.5 times the bolt diameter. Use safety Hoist rings (swivel eyes) as a preferred substitute for eye bolts wherever possible. Pad sharp edges to protect slings. Remember that machinery foundations or angle-iron edges may not feel sharp to the touch but could cut into rigging when under several

  • Material Handling Solutions

    • 6. Versatility YJM makes a complete line of crane systems to meet your individual needs. 7. Safety All cranes are pre-engineered for powered hoist operation-with a factor of 15% of the jib capacity for the combined weight of the Hoist And trolley and an additional factor of 25% of the jib capacity for the impact of powered hoists. 8. If It's Late, We Pay the Freight When delivery is critical, you can depend on YJM. Upon request, we will guarantee your crane will be ready

  • Introduction of overhead crane operator

    • of the following overhead crane types: Cab-operated Pendant/remote control All overhead (bridge) and gantry cranes that meet the requirements of the ASME B30.2, B30.11, B30.16, and/or B30.17 standards and have powered functions for Hoist, bridge, and trolley are covered by CCO certification exams. Note that the NCCCO Exam Management Committee draws questions from the ASME B30.2 standard for Overhead and Gantry Cranes in an effort to lessen the burden on candidates preparing to

  • Radio Communication Can Assist Container Gantry Crane Operators in Marine Terminals

    • using hand signals recognized at the port. However, during non-routine tasks or in an emergency, employees may need more interactive communication with the crane operator. Non-routine tasks include handling oversized or unusually shaped cargo, Hoisting personnel, and handling damaged containers or jammed twist- locks. Emergency situations can occur when one employee sees another employee beneath a load, or when a container is not properly disconnected from a chassis, resulting in accidental

  • Tower Crane

    • [caption id="attachment_38" align="alignleft" width="360" caption="tower crane"][/caption] Tower Crane Key Specification ·  Square shaped structure of steel tube ·  Mian color: yellow ·  Function: Hoisting ·  Attached devices: generator, reducer, driver cab, cable, counterweight ·  Certificates awarded: CQM, CE, TS, ISO9001:2000 ·  A-grade 315TM Certificate for producing, installation, rectification, and maintenance of tower crane issued

  • Self-Raising Tower Crane

    • Experience In This Area ·  800 Staffs ·  Version: fixed or traveling type ·  Free height: from 60meters ·  Max. height: 200meters ·  Max. radius: 70meters ·  Jib end load: 3MT at70 meters ·  Max. load: 12MT at 22meters ·  Hoisting mechanism system: 1 ·  Drum capacity: 400meters ·  Slewing mechanism system: 1 ·  Slewing speed: 0.6r/min ·  Trolley mechanism system:1 ·  Power line voltage: 380V/50Hz ·  Color: yellow ·  Counter weight: (without concrete) · 

  • Tower cranes

    • system adopts domestic fine quality or import components,performance is stable and reliable. Mast section, tie bar, upper and lower bracket and so on, main parts all adopt CO2, GSAW with large in weld penetration, small in transformative. Hoisting mechanism has good timing performance, rise and fall are stable, shockless. Swing mechanism adopts winding motor or frequent motor, operating balance, efficient, fast and convenient in position.

  • Single Girder Overhead Traveling Cranes

    • align="alignright" width="241" caption="Single Girder Overhead Traveling Cranes"][/caption] Some of the features of our Single Girder Overhead Traveling Cranes are Modern design Safe operation as per IS 807 / 3177 and Hoist IS 3938 Capacity - 0.5 ton to 20 ton Span - 3Mtrs to 35Mtrs and above Hoist - Ace wire rope Hoist with Motorized Trolley Speed - Single speed or dual speed for Hoisting, Cross travel and long Travel with variable Speeds. If

  • Industrial Cranes

    • toppling over when used. The deck cranes that are needed for a yacht may require the said minimum specs since yachts do not perform heavy lifting as compared to big boats and ships. Deck cranes for your yacht will not just be used for pleasure Hoisting and the like. It can most serve and help you during emergency purposes. There are many things that a deck crane installed in a yacht can do. For instance, you can use it for lifting heavy diving equipment and load it in the yacht. Used deck

  • Double Girder Overhead Traveling Cranes

    • Fabricated as per the latest industry standards, our range of double girder overhead traveling cranes is available in both single and dual speed for Hoisting, cross travel and long travel. Safe to operate, it possesses all the modern operational controls. Some of the features of our Double Girder Overhead Traveling Cranes are as follows: [caption id="attachment_183" align="alignright" width="239"

  • Gantry Crane or Goliath Crane

    • Features: [caption id="attachment_191" align="alignright" width="243" caption="Gantry crane / Goliath crane "][/caption] Heavy and Light duty Indoor and Outdoor purpose Efficient and Safe Operation As per Is 807 and 3177 and Hoist as per IS ¿ 3938 Capacity - 0.5 Ton to 50 Tons Span - 5 Meters to 30 Meters Over Hang if required If you are interested in our Gantry Cranes or Goliath Cranes, please email to us : sales@bossbuyer.com.

  • Tower Crane For Sale

    • · Square shaped structure of steel tube ·  Mian color: yellow ·  Function: Hoisting ·  Attached devices: generator, reducer, driver cab, cable, counterweight ·  Certificates awarded: CQM, CE, TS, ISO9001:2000 ·  A-grade 315TM Certificate for producing, installation, rectification, and maintenance of tower crane issued

  • Jib Cranes

    • Jib cranes are a style of cranes in case of which a horizontal portion called the boom or the jib supports a moveable Hoist And is generally attached firmly to a wall or a pillar fixed to the floor. Commonly termed as crane jibs, these machines are either capable of moving in an arc or are fixed in a particular position. The ones that can swing through an angle

  • Crane Control program analysis and comparison

    • the same time protect themselves. Brake motor energized and opened, the braking time is 0.3s, the drive to the start 3Hz frequency drive motor began to turn. Frequency of the drive continuously variable speed up time to the set value, can be seen Hoisting crane speed change is also continuous. With the SA from low gear to high gear switch. K5, K6, K7 state were combined into seven different input frequency, so that the output of seven different frequencies to obtain the lifting speed of seven

  • Electric Hoist Failure Analysis and Treatment

    • In recent years, the use of electric Hoist to install the increasing volume of production, the gourd is also increasing the number of failures, which not only affects the production of the normal operation of a major accident will lead to serious and how to reduce or prevent accidents, improve

  • Metallurgical cranes on the technical requirements for special work

    • eddy current brakes, power brakes, SCR power supply, DC power supply unit and the other the speed governor may cause speeding and 20t lifting mechanism for lifting the molten metal above General bridge crane must have the overspeed protection; 6. Hoisting mechanism should have positive and negative contactor fault protection to prevent the loss of power and brake motors are still in power which led to stall occurred; 7. The protection of all electrical equipment should meet the relevant requirements

  • General requirements of the safe operation of crane drivers

    • of the driver shall not carry out the following acts: (1) the use of parking privileges position limiter; (2) the use of anti-car to hit the brake; (3) examine the process of lifting operations and maintenance; (4) adjustment with load Hoisting, luffing mechanism of the brake, or increase the operating load range; (5) shall not be suspended from the head on top of things through, hanging objects, and may not stand on the lifting arm. Fifth, in strict accordance with the command signal

  • Crane Preventive Maintenance Checklist

    • / covers / rotating and reciprocating parts Rotating Upper Structure: turntable electrical collector ring counterweight frame hydraulic pump(s) hydraulic hoses / tubes / fittings hydraulic pressure electrical wiring main Hoist - motor / valves / lines main hoist - wrapping on drum main hoist - minimum (2) rope wraps auxilliary hoist - motor / valves & lines auxilliary hoist - wrapping on drum auxilliary hoist - minimum (2) rope wraps counterweight

  • Bridge and gantry cranes

    • A bridge crane (or overhead travelling crane) is defined as a crane comprising a bridge beam or beams mounted to end carriages at each end, capable of travelling along elevated runways and having one or more Hoisting mechanisms arranged across the bridge. A gantry crane comprises a bridge beam or beams, which are supported at one or both ends by legs mounted to end carriages, capable of travelling along runways and has one or more hoisting mechanisms. Bridge

  • Oregon OSHA’s new crane standard for the construction industry

    • are engaged in construction work and use cranes or derricks for construction. The standard takes effect Feb. 9, 2011. What equipment is covered? Oregon OSHA’s crane standard covers power-operated equipment used in construction that can Hoist, lower, and horizontally move a suspended load – including, but not limited to: Articulating knuckle-boom cranes Crawler cranes Derricks Mobile cranes Tower cranes The standard also applies to crane attachments such as: Augers

  • Crane Component

    • component kits for fabrication of economical cranes. BossBuyer crane components allow economic refurbishment of old cranes. Standardized end carriages, standardized wheel bogies, underslung trolleys, drive units with squirrel cage motors, electric Hoists up to 125 t lifting capacity, conductor systems, contactor control panels, radio remote controls, variable frequency speed control equipments, etc. BossBuyer crane components represent many years of experience in combination with permanent

  • BossBuyer Jib Cranes

    • Jib Crane Definition: A cantilevered boom or horizontal beam arm with bearings, Hoist And trolley. This lifting machine may pick up loads in all or part of a circle around the column to which it is attached. Jib cranes can be sturdy enough to lift a ton or more of weight, or small enough to attach to a truck. While people

  • Rotary and Rectilinear Cranes

    • mounted on wheels and arranged to travel longitudinally upon one or more rails. 8. Locomotive cranes. - Consisting of a pillar-crane mount,edi on a truck, and provided with a steam-engine capable of propelling and rotat- ing the crane, and of Hoisting and lowering the load. Rectilinear Cranes 9. Bridge cranes. - Having a fixed bridge spanning an opening, and a trolley moving across the bridge. 10. Tram cranes. -Consisting of a truck, or short bridge, traveling viinni1v nn overhead rails.

  • Electric Overhead Travelling Crane (EOT Crane) Parts

    • In some design separate motors may be fitted at each corner of the main bridge. The wheels run on two heavy rails fixed above the floor level along the length of the shop on two girders, called gantry girder. Crab: The Crab consists of the Hoisting machinery mounted on a frame, which is in turn mounted on at least four wheels and fitted with suitable machinery for traversing the crab to and fro across the main girders of the crane bridge. Needless to mention that the crab wheels run

  • Workstation Jib Cranes

    • weight of the application should match, NOT exceed, the workstation jib crane design weight. The capacity rating is based on a design load which includes the capacity rating of the crane plus 15% of the capacity for the weight of the Hoist And trolley. The BossBuyer design criteria for workstation jib cranes allows the least amount of lifting deflection so as not to hamper the performance of the enclosed track workstation jib cran

  • Articulating Jib Cranes

    • Cranes offer lower headroom than any other brand of articulating jib cranes. Bridge mounted articulating jib cranes offer lower headroom than those of other manufacturers as well and can support nearly any type of manipulator, balancer, or Hoist. BossBuyer Articulating Jib Cranes are designed using a 15% factor for weight of hoist unit and a 50% impact factor. All BossBuyer Articulating Jib Cranes are designed for moderate usage. Consult factory for usage other than moderate and all instances

  • Single-girder overhead travelling cranes with the new Demag DR rope hoist

    • Your benefits with the new Demag DR rope hoist optimised for crane applications Increased effidency with extended 2m*service life (1900-hour full load service life) Improved load handling with higher Hoist And cross-travel speeds Low-sway load motions thanks to infinitely variable cross travel speeds Proportional pushbuttons in the controls for stepless motions with frequency inverter control Monitoring for improved installation transparency Reliable

  • Active Sway Suppression Techniques of a Gantry Crane System

    • An IIR filtering technique related to input shaping has been proposed for controlling suspended payloads (Feddema, 1993). Input shaping has been shown to be effective for controlling oscillation of gantry cranes when the load does not undergo Hoisting (Noakes and Jansen, 1992; Singer et. al., 1997). Experimental results also indicate that shaped commands can be of benefit when the load is hoisted during the motion (Kress et. al. 1994). On the other hand, feedback control which is well

  • YJCrane Gantry Crane

    • structural damage or risking the safety of the load. 180 degree swivel seat reduces operator fatigue and safety issues by reducing the need for the operator to turn around in his seat while managing a load. Direct Line reeving straight to the Hoisting drums prevents premature wear and tear of wire rope. Superior Paint allows our cranes to maintain their appearance far beyond our closest competitor. Superior painting also buffers the steel from the elements and provides corrosion resistance.

Relative Searches

Hoist And Crane, Heavy Duty Crane, Heavy Crane Trucks, Grab Crane, Gantry Crane, Hoist And Crane, Hoist Crane, Hydraulic Crane, Hydraulic Lift Crane, Hydraulic Truck Crane,